DIY – Zojirushi Mug Customization


I’m back! Not only that, but I have a new DIY project to share with you!!

IMG_7113

Mitchell’s mom’s birthday was this month, and one of the things she asked for was a pretty Zojirushi mug. So we with the help of his sister (she pitched in and paid half for the gift) we picked out the mug we thought their mom would enjoy the most.

We went with the Champagne Gold. I picked it up from a local store, Uwajimaya.

This craft does require a cricut, so if you don’t have one, you may have to look on pinterest for a different tutorial.

You will need:

  • 2 different colors of vinyl. We chose navy blue and orange
  • Zojirushi travel mug
  • Cricut
  • Cricut cutting mat
  • Transfer Tape
  • Mod Podge
  • Brush

Step 1:

Choose your design. I made ours — and will happily share if people are interested. You can buy one on Etsy, or make your own using cricut design space. Below is a sample of the size of the cut file.

seas-the-day

Step 2:

Send the cut over to your cricut, make sure to turn the knob to vinyl and follow the usual instructions to cut. We cut the blue first, then the orange seastar.

Step 3.

NAVY BLUE:

With your vinyl now cut, peal off the excess vinyl, and weed out the middle of the a, s’s and y. Attach some transfer tape. This part can be time consuming if you aren’t use to using the cricut, so take your time and use your scraper tool. We used the small one, but this one would work too. Once all the writing is attached to the transfer tape, you may now carefully line it up on to your mug and place it. To get the vinyl to stick you’ll need your scraper tool. You’ll know it’s all ready when the lettering is no longer stuck to your transfer tape.

Step 4.

ORANGE

Follow the same instructions as above, but with the seastar.

Step 5.

Once all your vinyl is stuck to your mug and has no air-bubbles… (if you did a good job removing the transfer tape, you should not have any air bubbles.) You’re now ready to seal.

Step 6.

Squirt a small amount of your Mod Podge onto a plate or washable surface.  Take your paint brush and paint a LIGHT layer of Mod Podge over the vinyl on your mug. Let it dry for 15-20 minutes and come back for another light coat. I repeated this 3 times.  Typically Mod Podge needs to cure for several days before submerging your mug into water so please be careful!

These mugs, are always hand wash only, wash at your own risk 🙂

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s